Alpine CDE-141 Owner's Manual download pdf (Page 8)

8-EN

Accessory List

• Head Unit ..................................................................................1

• Power Cable ..............................................................................1

• Mounting Sleeve ......................................................................1

• Bracket key ...............................................................................2

• Screw (M5 × 8) ..........................................................................4

• Owner’s Manual..................................................................1 set

Turning Power On and Off

Press SOURCE to turn on the unit.

Note

• The unit can be turned on by pressing any other button except  and

e (Release).

Press and hold SOURCE for at least 2 seconds to turn

off the unit.

Note

• The first time power is turned on, the volume will start from level 12.

Source Selection

Press SOURCE to change the source.

TUNER  DISC  USB AUDIO/iPod

 AUXILIARY

 TUNER

*1 Only for CDE-141, and only when the iPod/iPhone is connected.

*2 Only when AUX SETUP is set to ON. Refer to “Setting the AUX

SETUP mode” on page 18.

Detaching and Attaching the Front Panel

Turn off the unit power.

Press e (Release) at the lower left side until the front

panel pops out.

Grasp the left side of the front panel and pull it out.

Notes

• The front panel may become hot in normal usage (especially the

connector terminals on the back of the front panel). This is not a

malfunction.

• When detaching the front panel, do not apply excessive force as it may

result in malfunction.

Insert the right side of the front panel into the main unit.

Align the groove on the front panel with the projections

on the main unit.

Push the left side of the front panel until it locks firmly into

the main unit.

Notes

• Before attaching the front panel, make sure that there is no dirt or dust

on the connector terminals and no foreign object between the front

panel and the main unit.

• Attach the front panel carefully, holding the sides of the front panel to

avoid pushing buttons by mistake.

Adjusting Volume

Turn the Rotary encoder until the desired sound is

obtained.

Setting Time

Press and hold AUDIOSETUP for at least 2 seconds to

activate the SETUP selection mode.

Turn the Rotary encoder to select GENERAL, and then

press ENTER.

AUDIO  GENERAL  DISPLAY  iPod

* CDE-141 only.

Turn the Rotary encoder to select the CLOCK ADJ mode,

and then press ENTER.

The time indication will blink.

Turn the Rotary encoder to adjust the hours while the

time indication is blinking.

When the hour has been adjusted, press ENTER.

Getting Started

Detaching

/ENTER



AUDIO/SETUP

SOURCE/



Rotary encoder

Attaching

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 31 32

Comments to this Manuals

No comments

Alpine CDE-141 Owner's Manual Page 8

Comments to this Manuals

Related products and manuals for Car video systems Alpine CDE-141