Alpine CDE-141 Owner's Manual download pdf (Page 13)

13-EN

Adjusting Subwoofer Level/Bass Level/

Middle Level/Treble Level/Balance (Between

Left and Right)/Fader (Between Front and

Rear)/Loudness/Defeat

Press AUDIOSETUP repeatedly to choose the desired

mode.

Each press changes the mode as follows:

SUBWOOFER

 BASS LEVEL

 MID LEVEL

 TRE LEVEL



BALANCE  FADER  LOUDNESS

*2/*3

 DEFEAT  VOLUME 

SUBWOOFER

*1 When the subwoofer mode is set to OFF, its level cannot be

adjusted.

*2 Adjustable only when DEFEAT is OFF.

*3 For details about loudness, refer to “Turning Loudness On/Off ”

on page 14.

Note

• If no operation is performed for 5 seconds, the unit automatically

returns to normal mode.

Turn the Rotary encoder until the desired sound is

obtained in each mode.

By setting DEFEAT ON, previously adjusted settings of BASS,

MID, TRE LEVEL and LOUDNESS will return to the factory

defaults.

Audio Setup

You can flexibly customize the unit to suit your own preference and

usage. From the AUDIO SETUP menu, Audio Setting can be modified.

Press and hold AUDIOSETUP for at least 2 seconds to

activate the SETUP mode.

Turn the Rotary encoder to select AUDIO, and then press

ENTER.

AUDIO  GENERAL  DISPLAY  iPod

*1 CDE-141 only.

Turn the Rotary encoder to select the desired sound

setting menu, and then press ENTER.

FACTORY EQ

*2/*3

 LOUDNESS

 3BAND EQ

*2/*4

 VOL LV ADJ

 HPF

 SUBWOOFER  SUBW LPF

*2/*5



SUBW PHASE

*2/*5/*6

 SUBW SYS

 POWER IC

(e.g. Select SUBWOOFER)

*2 Adjustment cannot be performed when DEFEAT is set to ON.

*3 Any change made to either FACTORY EQ or 3BAND EQ is

reflected in the others’ settings.

*4 In step 3, three sound adjustment items (Bass, Mid and Treble)

can be selected in 3BAND EQ mode. Turn the Rotary encoder

to select the desired item, and then press ENTER to continue

to step 4.

*5 These functions are inoperable when SUBWOOFER is set to

SUBW OFF.

*6 This function is inoperable when SUBW LPF is set to LPF OFF.

Turn the Rotary encoder to change the setting, and then

press ENTER.

(e.g. Select SUBW ON or SUBW OFF)

Press and hold AUDIOSETUP for at least 2 seconds to

return to normal mode.

Notes

•Pressing r returns to the previous Sound menu mode.

• Pressing and holding r for at least 2 seconds will return to normal

mode.

• If no operation is performed for 60 seconds, Sound menu mode is

canceled.

10 typical equalizer settings are preset at the factory for a variety of

musical source material.

 Setting item: FACTORY EQ

Setting contents:

USER / FLAT (Initial setting) / POPS / ROCK / NEWS / JAZZ /

ELEC DANCE / HIP HOP / EASY LIS / COUNTRY / CLASSICAL

Sound Setting

Subwoofer +0 ~ +15

Bass level -7 ~ +7

Middle level -7 ~ +7

Treble level -7 ~ +7

Balance L15 ~ R15

Fader R15 ~ F15

Loudness ON/OFF

Defeat ON/OFF

Volume 0 ~ 35

AUDIO/SETUP

/ENTER



Rotary encoder

Use steps 1 to 5 to select one of the setting modes to modify.

See the applicable section below for details about the

selected setting item.

Equalizer Presets (F-EQ)

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 31 32

Comments to this Manuals

No comments

Alpine CDE-141 Owner's Manual Page 13

Comments to this Manuals

Related products and manuals for Car video systems Alpine CDE-141