Alpine iXA-W407BT Datasheet download pdf (Page 7)

5-EN

• After turning the system off, a slight ghost of the image will

remain temporarily. This is an effect peculiar to LCD technology

and is normal.

• In cold temperature conditions, the screen may lose contrast

temporarily. After a short warm-up period, it will return to

normal.

Alpine products equipped with the Ai-NET bus, connected to the

iXA-W407BT, can be operated from the iXA-W407BT.

Depending on the products connected, the functions and displays

will vary. For details, consult your Alpine dealer.

Operation of some of the functions of this unit is very complex.

Because of this, it was deemed necessary to place these functions

into a special screen. This will restrict operation of these functions

to times when the vehicle is parked. This ensures the focus of the

driver’s attention will be on the road and not on the iXA-W407BT.

This has been done for the safety of the driver and passengers.

Audio Processor Adjustments cannot be made if the car is moving.

The car must be parked and the parking brake must be engaged for

the procedure described in the Owner’s Manual to be valid. The

warning “CAN’T OPERATE WHILE DRIVING” will be

displayed if any attempts are made to perform these operations

while driving.

• The iXA-W407BT draws minimal current even when its power switch

is turned off. If the switched power (ignition) lead of the

iXA-W407BT is connected directly to the positive (+) post of the

vehicle’s battery, the battery may be discharged.

An SPST (Single-Pole, Single-Throw) switch (sold separately) can be

added to simplify this procedure. Then, you can simply place it in the

OFF position when you leave the vehicle. Turn the SPST switch back

ON before using the iXA-W407BT. For connecting the SPST switch,

refer to the

“Connection Diagram of SPST Switch (Sold Separately)”

(page 64). If the power (ignition) lead is unswitched, it must be

disconnected from the battery post should the vehicle be left unused

for an extended period of time.

Protecting the USB connector

• Only an iPhone/iPod, USB memory or Portable audio player can

be connected to the USB connector on this unit. Correct

performance using other USB products cannot be guaranteed.

• If the USB connector is used, be sure to use only the supplied

connector cable with the unit. A USB hub is not supported.

• Depending on the connected USB memory device, the unit may

not function or some functions may not be performed.

• The audio file format that can be played back on the unit is

MP3/WMA/AAC.

• Artist/song name, etc., can be displayed, however characters

may not be correctly displayed.

On Handling USB Memory

• This unit can control a memory storage device that supports the

USB Mass Storage Class (MSC) protocol. Playable audio file

formats are MP3, WMA and AAC.

• USB memory function is not guaranteed. Use USB memory

according to the terms of agreement. Read the USB memory

Owner’s Manual thoroughly.

• Avoid usage or storage in the following locations:

Anywhere in the car exposed to direct sunlight or high

temperatures.

Anywhere the possibility of high humidity or corrosive

substances are present.

• Fix the USB memory in a location where driver operation will

not be hindered.

• USB memory may not function correctly at high or low

temperature.

• Use only certified USB memory. Note that even certified USB

memory, may not function correctly depending on its type or

state.

• Depending on the settings of the USB memory type, memory

state or encoding software, the unit may not play back or display

properly.

• Files protected by DRM (Digital Rights Management), cannot be

played back on this unit. These include AAC, WMA or other

files with some form of copyright protection.

• USB memory may take time to start playback. If there is a

particular file other than audio in the USB memory, it may take

considerable time before the file is played back or searched.

• The unit can play back “mp3”, “wma” or “m4a” file extensions.

• Do not add the above extensions to a file other than audio data.

This non-audio data will not be recognized. The resulting

playback may contain noise that can damage speakers and/or

amplifiers.

• It is recommended to back up important data on a personal

computer.

• Do not remove the USB device while playback is in progress.

Change SOURCE to something other than USB, then remove the

USB device to prevent possible damage to its memory.

CAUTION

Alpine accepts no responsibility for lost data, etc., even if data, etc.,

is lost while using this product.

1 2 3 4 5 6 7 8 9 10 11 12 ... 72 73

Comments to this Manuals

No comments

Alpine iXA-W407BT Datasheet Page 7

Comments to this Manuals

Related products and manuals for Car media receivers Alpine iXA-W407BT