Alpine INE-W947E Owner's Manual Page 52

  • Download
  • Add to my manuals
  • Print
  • Page
    / 180
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 51
52-EN
01GB04INE-W947E.fm
ALPINE INE-W947E 68-24567Z10-A (EN)
AUX Camera Setting
[AUX Camera] is selected on the Camera setup menu in step 3.
Refer to “Camera Setup Operation” (page 50).
Setting item: Camera Select/ / Camera Signal*
1
/Guide
Adjustment*
1
Setting contents: Off (Initial setting) / Rear*
2
/ OTHER
*
1
If “Camera Select” is set to “Off”, this option is not available.
*
2
If “Camera Select” in Direct Camera Setting is set to “Rear,
“Rear” cannot be set in AUX Camera Setting.
Setting the AUX Camera Signal Input
When the AUX camera is connected, the video input signal type can be
chosen.
Further setting item: Camera Signal
Setting contents: NTSC (Initial setting) / PAL
Adjusting the Rear Camera Guide
If you select “Rear” you can adjust the camera guide position.
Setting item: Guide Adjustment
1
Touch [Guide Adjustment].
The camera guide adjustment screen is displayed.
2
Touch [Adjust].
If [Adjust] does not appear, proceed to step 3.
3
Touch the guide you intend to adjust.
Guide line can also be selected by touching [] [].
4
Touch [], [], [] or [] to adjust the position
of the guide.
Touching [Clear] clears adjustments and returns to the setting
before guide line alteration.
5
After the adjustment is completed, touch [Set].
Adjusting guides simultaneously (for Rear camera
only)
Touch [Link].
The 3 vertical guides of the currently-selected guide link
together, allowing them to be adjusted simultaneously.
Turning guide display ON/OFF
Turning the selected guide off.
1
Touch [ON/OFF].
The currently selected guide will turn off.
2
To turn the guide on, touch [ON/OFF] again.
Guides that are turned off are still adjustable.
Returning guides to default.
1
Touch [Default].
A message window will appear.
2
Touch [OK].
Adjusted values will return to default settings.
Camera Interrupt Setting (Power OFF
Mode)
[Camera Interrupt] is selected on the Camera setup menu in step 3.
Refer to “Camera Setup Operation” (page 50).
You can set whether to display the rear camera image when the gear
lever is moved to the reverse (R) position while the unit is turned off.
Setting item: Camera Interrupt (Power OFF Mode)
Setting contents: On (Initial setting) /Off
Setting the Camera Input
Rear: Rear camera
OTHER: Side camera, Room camera, etc.
On: The rear camera image is displayed
Off: The rear camera image is not displayed
01GB00INE-W947E.book Page 52 Tuesday, April 9, 2013 1:33 PM
Page view 51
1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 179 180

Comments to this Manuals

No comments