Alpine CDE-175R Owner's Manual download pdf (Page 43)

43-EN

•During search mode, press VIEW may change the display.

• In some cases, certain search mode may not work, or some stations

cannot play normally.

• The provided stations are subject to change, please visit the home page

of vTuner for the latest information.

In Case of Difficulty

If you encounter a problem, turn the power off, then on again. If the unit

is still not functioning normally, review the items in the following

checklist. This guide will help you isolate the problem if the unit is at

fault. Otherwise, make sure the rest of your system is properly

connected or consult your authorized Alpine dealer.

No function or display.

• Vehicle’s ignition is off.

– If connected following instructions, the unit will not operate with

the vehicle’s ignition off.

• Improper power lead (Red) and battery lead (Yellow) connections.

– Check power lead and battery lead connections.

•Blown fuse.

– Check the fuse of the unit; replace with the proper value if

necessary.

• Internal micro-computer malfunctioned due to interference noise

etc.

– Press the RESET switch with a ballpoint pen or other pointed

article.

Unable to receive stations.

• No antenna or open connection in cable.

– Make sure the antenna is properly connected; replace the antenna

or cable if necessary.

Unable to tune stations in the seek mode.

• You are in a weak signal area.

– Make sure the tuner is in the DX mode.

• If the area you are in is a primary signal area, the antenna may not be

grounded and connected properly.

– Check your antenna connections; make sure the antenna is

properly grounded at its mounting location.

• The antenna may not be the proper length.

– Make sure the antenna is fully extended; if broken, replace the

antenna with a new one.

Broadcast is noisy.

• The antenna is not the proper length.

– Extend the antenna fully; replace it if it is broken.

• The antenna is poorly grounded.

– Make sure the antenna is grounded properly at its mounting

location.

CD Player not functioning.

• Out of operating temperature range +50°C (+120°F) for CD.

– Allow the vehicle’s interior (or trunk) temperature to cool.

CD playback sound is wavering.

• Moisture condensation in the CD Module.

– Allow enough time for the condensation to evaporate (about 1

hour).

CD insertion not possible.

• A CD is already in the CD player.

– Eject the CD and remove it.

Information

Basic

Radio

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 52 53

Comments to this Manuals

No comments

Alpine CDE-175R Owner's Manual Page 43

Comments to this Manuals

Related products and manuals for Car media receivers Alpine CDE-175R