Alpine CDE-175R Owner's Manual download pdf (Page 13)

13-EN

Receiving RDS Regional (Local) Stations

Press and hold AUDIO/SETUP for at least 2 seconds to

activate the SETUP mode.

Turn the Rotary encoder to select the Tuner mode, and

then press ENTER.

Turn the Rotary encoder to select RDS Regional, and then

press ENTER.

Turn the Rotary encoder to select ON or OFF.

In the OFF mode, the unit automatically keeps receiving the

related local RDS station.

Press and hold AUDIO/SETUP for at least 2 seconds to

return to normal mode.

Notes

• Pressing r during the procedure will return to the previous mode.

• If no operation is performed for 60 seconds in the SETUP mode, the

setting mode is cancelled.

PI SEEK Setting

Press and hold AUDIO/SETUP for at least 2 seconds to

activate the SETUP mode.

Turn the Rotary encoder to select the Tuner mode, and

then press ENTER.

Turn the Rotary encoder to select PI Seek, and then press

ENTER.

Turn the Rotary encoder to select ON or OFF.

Press and hold AUDIO/SETUP for at least 2 seconds to

return to normal mode.

Notes

• Pressing r during the procedure will return to the previous mode.

• If no operation is performed for 60 seconds in the SETUP mode, the

setting mode is cancelled.

Receiving Traffic Information

Press and hold BANDTA for at least 2 seconds so that the

“TA” indicator lights up.

Press  or  to select your desired traffic information

station.

When a traffic information station is tuned in, the “TP” indicator

lights up.

Traffic information is heard only when it is being broadcast. If

traffic information is not being broadcast, the unit is set in the

standby mode. When a traffic information broadcast begins, the

unit automatically receives it and the display shows “T.INFO”.

When the traffic information broadcast is over, the unit will

automatically set in the standby mode.

Notes

• If the traffic information broadcast signal falls below a certain level, the

unit remains in the receiving mode for 1 minute. If the signal remains

below a certain level for over 1 minute, the “TA” indicator blinks.

• If you do not want to listen to the traffic information being received,

lightly press  or  to skip that traffic information message. The

TA mode will remain in the ON position to receive the next traffic

information message.

• If the volume level is changed while receiving traffic information, the

changed volume level will be memorized. When traffic information is

received next time, the volume level will be automatically adjusted to

the level memorized.

• In the TA mode, the SEEK tuning selects only the TP stations.

PTY (Programme Type) Tuning

Press and hold ENTEROPTION for at least 2 seconds

to activate the Option menu while the unit is in Radio (FM

receiving) mode.

Turn the Rotary encoder to select the PTY Select, then

press ENTER.

The Programme Type of the station being currently received will

be displayed for 5 seconds.

If there is no receivable PTY broadcast, “No PTY” will be

displayed for 5 seconds.

If no RDS station can be received, the display shows “No PTY”.

Turn the Rotary encoder to choose the desired

programme type while the PTY (programme type) is being

displayed.

Press ENTER after selecting the programme type to

start searching for a station in the selected programme

type.

The chosen programme type display blinks during searching

and lights when a station is found.

If no PTY station is found, “No PTY” will be displayed for

5seconds.

Press and hold ENTEROPTION for at least 2 seconds

to return to normal mode.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 52 53

Comments to this Manuals

No comments

Alpine CDE-175R Owner's Manual Page 13

Comments to this Manuals

Related products and manuals for Car media receivers Alpine CDE-175R