Alpine CDE-126BT Owner's Manual download pdf (Page 9)

10-EN

Presetting Stations Automatically

Press BANDTA repeatedly until the desired radio band is

displayed.

Press and hold TUNEA.ME for at least 2 seconds.

The frequency on the display continues to change while the

automatic memory is in progress. The tuner will automatically

seek and store 6 strong stations in the selected band. They will

be stored into preset buttons 1 to 6 in order of signal strength.

When the automatic memory has been completed, the tuner

goes to the station stored in preset location No.1.

Note

• If no stations are stored, the tuner will return to the original station you

were listening to before the auto memory procedure began.

Tuning to Preset Stations

Select the band, and then press any one of the station

preset buttons (1 through 6) that has your desired radio

station in memory.

The display shows the band, preset number and frequency of

the station selected.

Note

•If the  indicator is illuminated, turn off the indicator by pressing

FUNC.SETUP, and then you can perform the operation.

Turning AF (Alternative Frequencies) ON/OFF

The RDS (Radio Data System) is a radio information system using the

57 kHz subcarrier of regular FM broadcast. The RDS allows you to

receive a variety of information such as traffic information, station

names, and to automatically re-tune to a stronger transmitter that is

broadcasting the same programme.

Press FUNC.SETUP so that the  indicator lights up.

Press 1AF to select the AF (Alternative Frequency) ON

or OFF mode.

Press FUNC.SETUP to activate the preset mode.

The  indicator goes out.

Notes

• When the AF ON mode is selected, the unit automatically tunes to a

strong signal station in the AF list.

• Use the AF OFF mode when automatic re-tuning is not required.

• Operate the unit while the  indicator lights up. If no operation is

performed for 10 seconds, the  indicator goes out.

The RDS digital data includes the following:

Receiving RDS Regional (Local) Stations

Press and hold FUNC.SETUP for at least 2 seconds to

activate the SETUP mode.

Turn the Rotary encoder to select the REGIONAL mode,

and then press ENT.

Turn the Rotary encoder to select ON or OFF.

In the OFF mode, the unit automatically keeps receiving the

related local RDS station.

RDS

PI Programme Identification

PS Programme Service Name

AF List of Alternative Frequencies

TP Traffic Programme

TA Traffic Announcement

EON Enhanced Other Networks

BAND/TA

/ENT

VIEW

1/AF

FUNC./SETUP

/SOUND



Rotary encoder

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 34 35

Comments to this Manuals

No comments

Alpine CDE-126BT Owner's Manual Page 9

Comments to this Manuals

Related products and manuals for Car media receivers Alpine CDE-126BT