Alpine CDE-100 User Manual download pdf (Page 3)

On handling Compact Discs (CD/CD-R/CD-RW)

• Do not touch the surface.

• Do not expose the disc to direct sunlight.

• Do not affix stickers or labels.

• Clean the disc when it is dusty.

• Make sure that there are no bumps around the disc.

• Do not use commercially available disc accessories.

Do not leave the disc in the car or the unit for a long time. Never

expose the disc to direct sunlight. Heat and humidity may damage

the CD and you may not be able to play it again.

To customers using CD-R/CD-RW

• If a CD-R/CD-RW cannot be played back, make sure the last

recording session was closed (finalized).

• Finalize the CD-R/CD-RW if necessary, and attempt playback

again.

About media that can be played

Use only compact discs with the label side showing the CD logo

□ COMPACT

LÏJU^UD piarTAL audio

Acaution

Alpine accept.s no lesponsihililyfor lost dula. etc.,

is lost w hile using ihi.4 pindin i.

even if data. err.

I TEXT~1

If you use non-standard compaa discs, correct performance cannot

be guaranteed.

You can play CD-Rs (CD-Recordables)/CD-RWs (CD-

ReWritables) which have been properly recorded as an audio CD.

You can also play CD-Rs/CD-RWs containing MP3/WMA/AAC

formatted audio files.

• Some of the following CDs may not play on this unit:

Flawed CDs, CDs with fingerprints, CDs exposed to extreme

temperatures or sunlight (e.g.. left in the car or this unit), CDs

recorded under unstable conditions, CDs on which a recording

failed or a re-recording was attempted, copy-protected CDs

which do not conform to the audio CD industry standard.

• Use discs with MP3/WMA/AAC files written in a format

compatible with this unit. For details, see “About MP3/WMA/

AAC”.

• ROM data other than audio files contained in a disc will not

produce sound when played back.

Protecting the USB connection terminal

• Only USB memory can be connected to the USB connection

terminal on this unit. Correct performance using other USB

products cannot be guaranteed. A USB hub is not supported.

• Do not connect a USB memory over 20 mm wide. Also, avoid

connecting USB memory and Front Aux at the same time.

• If a USB device is inserted in the unit, it projects out and may be

a danger while driving. Use a commercially available USB

standard extension cable, and connect it in a safe way.

• Depending on the connected USB memory device, the unit may

not function or some functions may not be performed.

• The audio file format that can be played back on the unit is

MP3/WMA/AAC.

• Artist/song name, etc., can be displayed, however characters

may not be correctly displayed.

On Handling USB Memory

• To prevent malfunction or damage, note the following points.

Read the USB memory Owner’s Manual thoroughly.

Do not touch the terminals by hand or metal.

Do not subject USB memory to excessive shock.

Do not bend. drop, disassemble, modify or soak in the water.

' Avoid usage or storage in the following locations:

Anywhere in the car exposed to direct sunlight or high

temperatures.

Anywhere the possibility of high humidity or corrosive

substances are present.

• Fix the USB memory in a location where driver operation will

not be hindered.

• USB memory may not function correctly at high or low

temperature.

• The USB flash memory .supports a maximum of 4 GB per

partition. The unit recognizes only one partition.

• Use only certified USB memory. Note that even certified USB

memory, may not function correctly depending on its type or

• USB memory function is not guaranteed. Use USB memory

according to the terms of agreement.

• Depending on the settings of the USB memory type, memory

stale or encoding software, the unit may not play back or display

properly.

• A file that is copy-protected (copyright protection) cannot be

played back.

• USB memory may take time to start playback. If there is a

particular file other than audio in the USB memory, it may take

considerable time before the file is played back or searched.

• The unit can play back “mp3”, “wma" or "m4a" file extensions.

• Do not add the above extensions to a file other than audio data.

This non-audio data will not be recognised. The resulting

playback may contain noise that can damage speakers and/or

amplifiers.

• It is recommended to back up important data on a personal

computer.

• Do not remove the USB device while playback is in progress.

Change SOURCE to something other than USB, then remove the

USB device to prevent possible damage to its memory.

* •

• Windows Media and the Windows logo are trademarks, or

registered trademarks of Microsoft Corporation in the United

States and/or other countries.

• “MPEG Layer‘3 audio coding technology licensed from

Fraunhofer IIS and Thomson.”

• “Supply of this product only conveys a license for private,

non-commercial use and does not convey a license nor imply

any right to use this product in any commercial (Le. revenue-

generation) real time broadcasting (terrestrial, satellite, cable

and/or any other media), broadcasting/streaming via internet,

intranets and/or other networks or in other electronic content

distribution systems, such as pay-audio or audio-on-demand

applications. An independent license for such use is required.

For details, please visit http://www. mp3licensing.com”

Getting Started

SOURCE/Ó Rotary encoder

Accessory List

• Head unit

............

• Power cable

.......

• Mounting sleeve...

• Carrying case

.....

• Bracket key

........

• Rubber Cap

........

• Bolt Stud.............

• Owner’s Manual...

Turning Power On and Off

off the unit.

The front panel may become hoi in normal usage (especially the

connector terminals on the back of the front panel). This is not a

malfunction.

To protect the from panel, place it in the supplied carrying case.

When detaching the from panel, do not apply excessive force as it

may result in malfunction.

Attaching

1 Insert the left side of the front panel into the main

unit. Align the groove on the front panel with the

projections on the main unit.

2 Push the right side of the front panel until it locks

firmly into the main unit.

• Before attaching the front panel, make sure that there is no dirt or

dust on the connector terminals and no foreign object between the

from panel and the main unit.

• Attach the from panel carefully, holding the sides of the from pane! to

avoid pushing buttons by mistake.

Adjusfing Volume

Turn the Rotary encoder until the desired sound is

obtained. Volume: 0-40

Seffing Time

Press SOURCE/6 to turn on the unit.

• The first time power is turned on, the volume will start from level ¡8.

Press and hold SOURCE/cb for at least 1 second to turn

Defaching and Affaching fhe Proof Panel

Detaching

1 Turn off the unit power.

2 Press ^ (Release) at the upper right side until the

front panel pops out.

3 Grasp the right side of the front panel and pull it out.

1 Press and hold VIEW for at least 2 seconds.

The hour indication will Wink.

2 Press or to adjust the hours while the time

indication is blinking.

3 When the hour has been adjusted, press VIEW.

The minute indication vyill blink.

4 Press h« or to adjust the minutes while the

time indication is blinking.

5 When the minute has been adjusted, press VIEW.

The setting time mode is completed.

• Hold down or to change numbers rapidly.

1 2 3 4 5 6 7 8 ... 11 12

Comments to this Manuals

No comments

Alpine CDE-100 User Manual Page 3

Comments to this Manuals

Related products and manuals for Car speakers Alpine CDE-100