Alpine TUA-T550 Owner's Manual download pdf (Page 4)

En-2

DO NOT USE BOLTS OR NUTS IN THE BRAKE OR

STEERING SYSTEMS TO MAKE GROUND CONNECTIONS.

Bolts or nuts used for the brake or steering systems

(or any other safety-related system), or tanks

should NEVER be used for installations or ground

connections. Using such parts could disable control of

the vehicle and cause re etc.

DO NOT ALLOW CABLES TO BECOME ENTANGLED IN

SURROUNDING OBJECTS.

Arrange wiring and cables

in compliance with the manual to prevent obstructions

when driving. Cables or wiring that obstruct or hang up

on places such as the steering wheel, gear lever, brake

pedals, etc. can be extremely hazardous.

MAKE THE CORRECT CONNECTIONS. Failure to make

the proper connections may result in re or product

damage.

CAUTION

This symbol means important instructions. Failure

to heed them can result in injuryor material property

damage.

HALT USE IMMEDIATELY IF A PROBLEM APPEARS.

Failure to do so may cause personal injury or damage to

the product. Return it to your authorized Alpine dealer

or the nearest Alpine Service Center for repairing.

USE SPECIFIED ACCESSORY PARTS AND INSTALL

THEM SECURELY.

Be sure to use only thespecied

accessory parts. Use of other than designated parts may

damage this unit internally or may not securely install

the unit in place. This may cause parts to become loose

resulting in hazards or product failure.

DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE

OR DUST.

Avoid installing the unitin locations with high

incidence of moisture or dust. Moisture or dust that

penetrates into this unit may result in product failure.

HAVE THE WIRING AND INSTALLATION DONE BY

EXPERTS.

The wiring and installation of this unit

requires special technical skill and experience. To

ensure safety, always contact the dealer where you

purchased this product to have the work done.

ARRANGE THE WIRING SO IT IS NOT CRIMPED OR

PINCHED BY A SHARP METAL EDGE.

Route the cables

and wiring away from moving parts (like the seat rails)

or sharp or point ededges. This will prevent crimping

and damage to the wiring. If wiring passes through

a hole in metal, use a rubber grommet to prevent the

wire’s insulation from being cut by the metal edge of

the hole.

IMPORTANT.

Please record the serial number of your unit

in the space provided below and keep it as a

permanentrecord. The serial number plate is located

on the bottom of the unit.

SERIAL NUMBER: ______________________________________

INSTALLATION DATE: __________________________________

INSTALLATION TECHNICIAN: ___________________________

PLACE OF PURCHASE: ________________________________

1 2 3 4 5 ... 24

Comments to this Manuals

No comments

Alpine TUA-T550 Owner's Manual Page 4

Comments to this Manuals

Related products and manuals for Car media receivers Alpine TUA-T550