Alpine Multimedia Manager PXA-H900 Owner's Manual Page 18

  • Download
  • Add to my manuals
  • Print
  • Page
    / 66
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 17
14-EN
Automatic Adjustments
Preparations for automatic
adjustments
The PXA-H900 is equipped with two automatic adjustment
functions: “Adaptive Equalizer” and “Precision Automated Time
Correction”.
The preparations described below must be made in order to
perform these automatic adjustments. After making these
preparations, refer to “Automatic adjustments (Adaptive
Equalizer)” (page 16) and “Performing time correction automati-
cally (Precision Automated Time Correction)” (page 20) to
perform the respective automatic adjustments.
1
Check that the defeat mode is off.
(See page 53.)
2
Adjust the head unit and amplifier levels.
Head unit:
Set the balance and fader to “center”.
Front, rear and center amplifiers:
Set the amp gains to “center” or “normal” to start.
If there are no rear speakers, check that the rear
speakers are turned off. (See page 8.) Gain
levels may be changed if you are not satisfied
with the automatic results. Make the gain
changes and return the automatic adjustment.
Subwoofer amplifier:
Set the amplifier gain to “center” or “normal”. If
the subwoofer is located in the trunk or a remote
place (for example at the very back of a station
wagon), adjust the subwoofer to increase the
volume several steps.
Speaker Crossovers:
Set the crossovers for all the speakers in the
system that will require them. See page 32,
“Crossover adjustment”, for more information on
setting the crossovers.
3
Connect the included microphone to the PXA-
H900.
Refer to the Installation manual.
The adjustment differs according
to the position of the micro-
phone. Search for the position at
which the desired sound quality
can be achieved.
We recommend using speaker
boxes or box locations that
produce low levels of indirect
sound (for example, sealed boxes
or vented boxes with the vents
firing into the trunk).
The proper adjustments cannot
be achieved if the subwoofer is
located in the trunk and the trunk
and cabin are separated by a
metal sheet. Either move the
subwoofer into the cabin or open
a hole in the rear tray to join the
two spaces. (This is not
necessary if the partition is not a
metal sheet.)
If the partition is a metal sheet,
open a hole in the rear tray.
If you encounter a problem,
consult your authorized dealer.
Is the partition a metal
sheet?
Or move the subwoofer into the
cabin.
Do not disconnect the micro-
phone during the automatic
adjustment procedure.
Page view 17
1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 65 66

Comments to this Manuals

No comments