Alpine CDA-9887R Datasheet download pdf (Page 19)

17-EN

01GB05CDA-9887R.fm

ALPINE CDA-9887R 68-08564Z21-A (EN)

Turn the Rotary encoder to select the desired

equalizer characteristic, and then press //ENT.

Parametric EQ Graphic EQ

(Initial setting)

Press and hold FUNC./SETUP for at least 2

seconds to return to normal mode.

• Pressing AUDIO/RTN during the procedure will return to the

previous mode.

• If no operation is performed for 60 seconds in the SETUP mode, the

setting mode is cancelled.

• This function is inoperable when DEFEAT is set to ON (page 16).

• Press and hold /ESC for at least 2 seconds, the setting mode is

cancelled.

Adjusting and Storing the Parametric

Equalizer Curve

You can modify the Equalizer settings to create a response curve more

appealing to your personal taste.

To adjust the Parametric Equalizer Curve, set the EQ mode to

Parametric EQ. For details, refer to “Setting EQ mode” (page 16).

Press A.SEL to recall the DSP adjust mode.

Media Xpander Crossover T.Correction

Parametric EQ / Graphic EQ Media Xpander

Turn the Rotary encoder to select Parametric EQ

mode, and then press //ENT.

Press BAND/TA to select the band to be adjusted.

Band1 Band2 Band3 Band4 Band5 Band1

Press or to select frequency bands.

Adjustable frequency bands:

20 Hz to 20 kHz (in 1/3 octave steps)

Band-1: 20 Hz~80 Hz (63 Hz)

Band-2: 50 Hz~200 Hz (150 Hz)

Band-3: 125 Hz~3.2 kHz (400 Hz)

Band-4: 315 Hz~8 kHz (1 kHz)

Band-5: 800 Hz~20 kHz (2.5 kHz)

Turn the Rotary encoder to adjust the level.

Adjustable level: -6 to +6 dB

Press SOURCE/ to set the bandwidth (Q).

Adjustable bandwidth: 1, 1.5, 3

To adjust another band, repeat steps 3 to 6 and

adjust all bands.

When the setting has been completed, select any

one of the preset buttons (1 through 6), press

and hold the desired preset buttons for at least 2

seconds.

Turn the Rotary encoder to select PROTECT

YES/NO, and then press //ENT to store the

adjusted contents.

PROTECT YES PROTECT NO

(Initial setting)

• If YES is selected, the adjusted contents are protected and stored into

the preset buttons. When you want to store the parameter into a

protected preset button, “REPLACE NO/YES” can be selected.

• If NO is selected, the preset is stored.

After setting, press and hold /ESC for at least 2

seconds to return to normal mode.

• The frequencies of adjacent bands cannot be adjusted within 4 steps.

• This function is inoperable when DEFEAT is set to ON (page 16).

• While adjusting the Parametric EQ, you should consider the

frequency response of the connected speakers.

• The stored contents are not deleted even when resetting the unit or

disconnecting the battery.

• The stored contents can be recalled by performing operation in

“Recalling the Stored Equalizer Curve” (page 18).

• Pressing AUDIO/RTN when Parametric EQ is adjusted will return to

the previous item.

• If MultEQ is turned on, the A.SEL button is ineffective. For details,

refer to “Turning MultEQ on/off” (page 16).

• If no operation is performed for 60 seconds, the unit will return to the

normal mode.

Adjusting and Storing the Graphic

Equalizer Curve

You can modify the equalizer settings to create a response curve more

appealing to your personal taste. To adjust the graphic equalizer curve,

set the EQ mode to Graphic EQ. For details, refer to “Setting EQ mode”

(page 16).

Press A.SEL to recall the DSP adjust mode.

Media Xpander Crossover T.Correction

Parametric EQ / Graphic EQ Media Xpander

Turn the Rotary encoder to select Graphic EQ

mode, and then press //ENT.

Press BAND/TA to select the band to be adjusted.

Band1 Band2 Band3 Band4 Band5

Band6 Band7 Band1

Band-1 (63 Hz) / Band-2 (150 Hz) / Band-3 (400 Hz) /

Band-4 (1 kHz) / Band-5 (2.5 kHz) / Band-6 (6.3 kHz) /

Band-7 (17.5 kHz)

Turn the Rotary encoder to adjust the level.

Adjustable output level: -6 to +6 dB

To adjust another band, repeat steps 3 and 4, and

then adjust all bands.

When the setting has been completed, select any

one of the preset buttons (1 through 6), press

and hold the desired preset buttons for at least 2

seconds to store the adjusted contents.

PEQ: 5-band Parametric EQ (Initial setting)

GEQ: 7-band Graphic EQ

01GB00CDA-9887R.book Page 17 Thursday, March 15, 2007 3:55 PM

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 49 50

Comments to this Manuals

No comments

Alpine CDA-9887R Datasheet Page 19

Comments to this Manuals

Related products and manuals for Car media receivers Alpine CDA-9887R