Alpine TCS-V430A Owner's Manual Page 4

  • Download
  • Add to my manuals
  • Print
  • Page
    / 12
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 3
4
PUSH
OPERATION - Overhead Monitor
Dual Headphone Outputs (2)
SmartView™ Swivel Mechanism
LCD Monitor Panel
Monitor Open Button
Built-in Dome Light
Alpine Back-lit Logo
1) Dual Headphone Outputs
Two output jacks (mini-phono plug) are provided for wired headphones. Output level is adjusted
using the Volume UP/DN buttons on the remote control.
2) SmartView™ Swivel Mechanism
The design of this mechanism provides the rear seat passengers a stable picture, viewable from
many different angles. This system allows the LCD to tilt from 90 to 120 degrees in 10 degree
steps. At the same time, the LCD will maintain its horizontal view while being rotated from left
to right, up to 30 degrees, in 10 degree steps.
NOTE:
• The LCD will only close when rotation is at 0 degrees to prevent damage to the monitor.
• When rotating the monitor, use both hands on either side of the panel to ensure even pressure
on the mechanism. This will prevent damage to the SmartView™ Swivel mechanism.
• Make sure the panel is fully opened (90 degree position) before trying to rotate.
3) LCD Monitor Panel
This is a 7 inch, Widescreen TFT, Active Matrix LCD. In addition, an Infrared Wireless
Headphone transmitter is located on top of the LCD panel. When the monitor panel is closed, the
power is automatically turned off.
NOTE: Whenever the LCD Panel is opened from closed position or Ignition/ACC is ON at
opened position, the Main Power is turned on automatically.
4) Monitor Open Button
Press this button to release the Monitor Panel. The Panel will drop down slightly allowing you to
fully open to its 90 degree or greater position. To close, firmly press the LCD Monitor Panel
back up into the housing until a click is heard.
5) Built-in Dome Light
To replace the bulb, gently open the dome light lens from the front . Use a 12V, 5W bulb or
equivalent. (e.g. SYLVANIA DE3022)
6) Alpine Back-lit Logo
Blue, back-lit ALPINE logo will turn on when the overhead monitor main power is on.
1
2
3
4
5
6
Page view 3
1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments