Alpine IVX-C806 Owner's Manual download pdf (Page 10)

4. Mounting

Note:

The main unit must be mounted within ±5 degrees of the

horizontal plane, left to right, and 30 degrees of the

horizontal plane, back to front.

Less than 30°

a When mounting using Velcro fastener

1 Place Velcro fasteners.

Place two pieces of Velcro fasteners onto the

mounting surface. The rough side should be

facing the navigation unit.

2 Press the Navigation unit onto the Velcro

fastener at the mounting position.

Remove the backing to the adhesive on the

Velcro strips. Press the Navigation unit onto the

mounting location.

Continued to the step 5 "Securing leads, etc."

a When mounting on the rear tray

1 Mount the brackets 1 on the unit.

Mount the brackets at both sides of the unit with

screws with double washer (M4×8) 3.

Floor

Velcro fasteners

(Bottom side)

Depending on the

locations of the

mounting screw holes,

the mounting brackets

(for the left and right)

can be used on either

side.

2 Attach the unit on the rear tray.

Attach the unit securely with hex bolts (M6×50)

4, flanged hex nuts (M6) 7, spring washers

(M6) 6, and wing nuts (M6) 8.

Continued to step 5 "Securing leads, etc."

a When mounting the unit directly on

the floor

1 Mount the brackets 1 on the unit.

Mount the brackets at both sides of the unit with

screws with double washer (M4×8) 3.

2 Mount the unit on the floor.

Mount the unit on the floor with flanged self-

tapping screws (M5×15) 5 and spring washers

(M6) 6.

Warning: Do not damage pipe or wiring when

drilling holes.

Continued to step 5 "Securing leads, etc."

Depending on the

locations of the mounting

screw holes, the mounting

brackets (for the left and

right) can be used on

either side.

(Bottom

side)

1 2 ... 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

Alpine IVX-C806 Owner's Manual Page 10

Comments to this Manuals

Related products and manuals for Receiver Alpine IVX-C806