Alpine CDE-9821R Owner's Manual download pdf (Page 22)

21-EN

Lock pin

3 Slide the unit into the dashboard. When the unit is

in place, make sure the locking pins are fully

seated in the down position. This can be done by

pressing firmly in on the unit while pushing the

locking pin down with a small screwdriver. This

ensures that the unit is properly locked and will

not accidentally come out from the dashboard.

Install the Detachable Front Panel.

Removal

1 Remove the detachable front panel.

2 Use a small screwdriver (or similar tool) to

push the locking pins to the “up” position (see

Fig. 3). As each pin is unlocked, gently pull out

on the unit to make sure it does not re-lock

before unlocking the second pin.

3 Pull the unit out, keeping it unlocked as you do so.

Installation

Caution (CDM-9825RB only)

Do not block the unit’s fan or heat sink, thus preventing air

circulation. If blocked, heat will accumulate inside the unit

and may cause a fire.

Remove the Detachable Front Panel (refer to

page 4). Slide mounting sleeve from main unit

(see Removal Procedure below). Slide the

mounting sleeve into the dashboard.

When your vehicle has the Bracket, mount the

long hex bolt onto the rear panel of this unit and

put the Rubber Cap on the hex bolt. If your

vehicle does not have the Mounting Support,

reinforce the head unit with the metal mounting

strap (not supplied). Connect all the leads of this

unit according to details described in the

CONNECTIONS section.

NOTE

For the screw ∗, provide a proper screw to the chassis

installing location.

Screws (M5 × 8)

(Included)

This unit

Mounting Bracket

Front frame

Hex Bolt

(Included)

Air ventilation

hole

Dashboard

Rubber Cap

(Included)

Bracket

Mounting sleeve

(Included)

This unit

No Pressure Here

∗

Metal Mounting Strap

Screw

Bolt Stud

Hex Nut (M5)

This unit

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments

Alpine CDE-9821R Owner's Manual Page 22

Comments to this Manuals

Related products and manuals for Receiver Alpine CDE-9821R