Alpine CDE-9873 User Manual download pdf (Page 16)

15-EN

You can flexibly customize the unit to suit your own preferences and

usage. From the SETUP menu, Sound Customizing, Visual

Customizing, etc., can be modified.

Press and hold A.SEL/SETUP for at least 2 seconds

to activate the SETUP mode.

Turn the Rotary encoder to select the desired

SETUP menu, and then press / /ENT.

(e.g. Select SUBWOOFER)

DIMMER SUBWOOFER (SUBW SYS) *

CLOCK ADJ*

PLAY MODE SCROLLTYPE

TEXT SCR POWER IC DEMO DIMMER

Displayed only when SUBW is on.

Refer to “Setting Time” (page 7).

Turn the Rotary encoder to change the setting.

(e.g. Select SUBW ON or SUBW OFF.)

Press and hold A.SEL/SETUP for at least 2 seconds

to return to normal mode.

• Press /RTN to return to the previous mode.

• If no operation is performed for 60 seconds, the unit will return to

normal mode automatically.

Subwoofer On and Off

When the subwoofer is on, perform the steps below to adjust the

subwoofer output level.

1 In the normal mode, press Rotary encoder repeatedly to

select the SUBW mode.

2 Adjust the level by turning the Rotary encoder.

Setting the Subwoofer System

Select either SYS 1 or SYS 2 for the desired subwoofer effect.

Dimmer Control

Set the DIMMER control to AUTO to decrease the illumination

brightness of the unit with the head lights of the vehicle ON. This mode

is useful if you feel the unit’s backlighting is too bright at night.

Scroll Type Setting

Choose from two scrolling methods.

Select the type you prefer.

SETUP

Use steps 1 to 4 to select one of the SETUP modes to

modify. See the applicable section below for details

about the selected SETUP item.

Rotary encoder

//ENT

/RTN

A.SEL/SETUP

Sound Customizing

SUBW ON (Initial setting) / SUBW OFF

SUBW BASS TREBLE BAL FADER DEFEAT

VOLUME SUBW

SUBW SYS 1 (Initial setting) / SUBW SYS 2

SUBW SYS 1: Subwoofer level changes according to the main

volume setting.

SUBW SYS 2: Subwoofer level change is different from the main

volume setting. For example, even at low volume

settings, the subwoofer is still audible.

Visual Customizing

DIM AUTO (Initial setting) / DIM MANUAL

SCR TYPE1 / SCR TYPE2 (Initial setting)

SCR TYPE1: The characters scroll from right to left, a

single character at a time.

SCR TYPE2: Words are built up from left to right, a single

character at a time. When the display is filled,

it is cleared and the remaining words are

displayed the same way until all words of the

title have been shown.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 30 31

Comments to this Manuals

No comments

Alpine CDE-9873 User Manual Page 16

Comments to this Manuals

Related products and manuals for Microphones Alpine CDE-9873