Alpine CDA-7865R Owner's Manual download pdf (Page 23)

23

Video output ON/OFF

Video output ON/OFF

(Only when CVA-1005E/IVA-C800E is

connected)

When this unit is used with the CVA-

1005E/IVA-C800E + the TME-M750

(Extra Monitor for Rear Seat), the DVD

video can be viewed independently of

what’s being viewed on the CVA-1005E/

IVA-C800E.

For example, DVD video can be moni-

tored on the Rear Monitor, while a

Navigation map is displayed on the CVA-

1005E/IVA-C800E. If an audio source is

selected, the main audio system will be

used to listen to the CVA-1005E/IVA-

C800E. Use the RCA connectors at the

rear of the DVA-5205E to feed audio to

your Rear monitor.

Set AUX OUT of “Selecting Rear

Monitor” on the CVA-1005E/IVA-

C800E side to AUX 1.

Notes:

• Refer to the Instruction Manual of the CVA-

1005E/IVA-C800E for operation on the CVA-

1005E/IVA-C800E side.

• This output is at a fixed level and requires a

preamp with a volume control to adjust listening

levels.

• If the power or the ignition key is turned off

without canceling the video output mode, the set

will start up in the video output mode the next

time the power is turned on, and the DVD player’s

power will remain on even if the source is

switched with the CVA-1005E/IVA-C800E or if you

try to turn off the power with the DVA-5205E’s

remote control unit.

If this happens, press the “V.OUT” button for at

least 2 seconds to cancel the video output mode.

Change the source on the CVA-

1005E/IVA-C800E side to MD, CD,

radio, etc.

Use the “Playing 2 Sources

Simultaneously” function on the

CVA-1005E/IVA-C800E side to

select DVD with the V.SEL button.

Press “V.OUT” on the

remote control unit for

this equipment at least

2 seconds.

After using this function,

be sure to press “V.OUT”

for at least 2 seconds to

cancel the video output

mode.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 71 72

Comments to this Manuals

No comments