Alpine DVA-9965 User Manual Page 48
- Page / 79
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
46-EN
Setting the Speakers
1
Check that Defeat mode is off (page 20).
2
Press and hold MENU for at least 2 seconds.
3
Select the Speaker Select mode by sliding your
finger on the GlideTouch bar to the left or right.
Press the GlideTouch bar under the Speaker
Select mode.
4
Touch the GlideTouch bar and select the speaker
by sliding it to the left or right, then press the
GlideTouch bar.
5
Touch the GlideTouch bar, and select any
speaker (ON/OFF) by sliding it to the left or right,
then press the GlideTouch bar.
FRONT1: OFF/TW (Tweeter)/FULL (Full Range)
*
FRONT2: OFF/ON
REAR: OFF/ON
CENTER: OFF/ON
SUBWOOFER: OFF/MONO/STEREO
* Displayed when “USER’S” is set in “Setting the Response Slope
for the High Range Speaker” (page 37).
6
To adjust another speaker, return to the previous
display by pressing MENU and repeat step 5.
7
When the setting is complete, press and hold
MENU for at least 2 seconds.
• Set the speaker which is not connected to OFF.
• Settings above can be carried out even when the speaker is set to
OFF in “Speaker Setup” (page 49).
• To use the subwoofer in MONO with PXA-H700 or PXA-H701
connected, connect the subwoofer to the subwoofer output terminal
of PXA-H700 or PXA-H701.
Set MX Mode of the External Audio
Processor
Before performing the operations below, set MX (Media Xpander)
mode of the PXA-H700 to “AUTO” when the PXA-H700 is connected.
1
Check that Defeat mode is off (page 20).
2
Press MENU.
33
Select the Media Xpander mode by sliding your
finger on the GlideTouch bar to the left or right.
Press the GlideTouch bar under the Media
Xpander mode.
4
Press the GlideTouch bar under ON to activate
MX.
5
After setting, press and hold MENU for at least 2
seconds to return to normal mode.
6
Press SOURCE/POWER to select the source to
which you want to apply MX (Media Xpander).
7
Press and hold MENU for at least 2 seconds.
8
Select the Media Xpander mode by sliding your
finger on the GlideTouch bar to the left or right.
Press the GlideTouch bar under the Media
Xpander mode.
9
Select the MX Level by sliding your finger on the
GlideTouch bar to the left or right. Press the
GlideTouch bar under the desired level or OFF
(Non Effect).
FM (MX level 1 to 3):
The medium to high frequencies become clearer, and
produces well balanced sound at all frequencies.
CD (MX level 1 to 3):
CD mode processes a large amount of data during playback.
MX takes advantage of this large data quantity to reproduce a
more clear, clean output.
CMPM/SAT (MX level 1 to 3):
This corrects information that was lost at the time of
compression. This reproduces a well-balanced sound close to
the original.
DVD (Video CD)
(MOVIE MX level 1 to 2):
The dialogue portion of a video is reproduced more clearly.
(DVD MUSIC):
A DVD or Video CD contains a large quantity of data such as
music clip. MX uses this data to reproduce the sound
accurately.
AUX (MX level 1):
Choose the MX mode (CMPM, MOVIE, or MUSIC) that
corresponds to the media connected.
If two external devices are connected, a different MX
mode for each media can be selected.
10
After setting, press and hold MENU for at least 2
seconds to return to normal mode.
• The contents of MX set here is reflected to PXA-H700 or PXA-
H701.
• When OFF is selected, MX effect of each MX mode will be OFF.
• Each music source, such as radio, CD, and MP3 can have its own
MX setting.
• MX mode does not function when MX is ON for AM radio.
• MX COMPRESS MEDIA is applied for MP3/WMA, MMD and
iPod.
• If no operation is performed for 15 seconds, the unit will return to
the normal mode.
X-OVER Adjustment
1
Check that Defeat mode is off (page 20).
2
Press and hold MENU for at least 2 seconds.
3
Select the Crossover (X-OVER) mode by sliding
your finger on the GlideTouch bar to the left or
right. Press the GlideTouch bar under the
Crossover (X-OVER) mode.
4
Select L+R or L/R by pressing and holding BAND
for at least 2 seconds.
L+R: Sets the same adjustment values for the left and
right channels.
L/R: Different adjustment values can be set for the left
and right channels.
5
Select the desired channel by pressing BAND.
6
Touch the GlideTouch bar, and select the desired
cut-off frequency (Crossover Point) by sliding it to
the left or right, then press the GlideTouch bar.
7
Press SOURCE/POWER to adjust the slope.
8
Turn the Rotary encoder to adjust the output
level.
- DVA-9965 1
- Contents 3
- Installation and Connections 4
- Operating Instructions 5
- Discs playable on this unit 7
- Using DVD-Rs/DVD-RWs 8
- Disc terminology 8
- Function guide 9
- GlideTouch bar 9
- Getting Started 10
- Display Tilt Adjustment 11
- Adjusting Volume 11
- Lowering Volume Quickly 11
- Listening to Radio 12
- Tuning to Preset Stations 12
- CD/MP3/WMA 13
- Repeat Play 14
- Scanning Programs 15
- Searching from CD Text 15
- M.I.X. (Random Play) 15
- About MP3/WMA 16
- Terminology 17
- DVD/Video CD 18
- Supplementary explanation 19
- Switching the Audio Tracks 20
- (DVD only) 21
- Sound Setting 22
- Equalizer Curve 23
- Setting User's EQ mode 23
- About the Crossover 25
- F/R/Sub-W 26
- About Time Correction 27
- Time Difference Table 28
- Settings 29
- Setting the MX Mode 29
- Other Functions 30
- Displaying Time 31
- Blackout Mode On and Off 31
- Rear DVD Function 31
- Download Operation 32
- Data Downloading 33
- Downloading the Wallpaper 33
- DVD Setup 34
- Setting the TV Screen 35
- Setting the Country Code 35
- Setting the Digital Output 36
- Custom Setup 37
- Setup Operation 38
- Audio Setting 39
- Display Setting 39
- Demo Setting 40
- SAT Radio Receiver 41
- (Optional) 41
- Receiving Stored Channels 42
- Quick Search Function 42
- Changing the Display 42
- Playback 43
- Searching for a desired Song 43
- Quick Search 44
- Displaying the Text 45
- Changer (Optional) 46
- External Audio Processor 47
- Setting the Speakers 48
- Processor 48
- X-OVER Adjustment 48
- Phase Switching 49
- Graphic Equalizer Adjustments 50
- Setting Bass Compressor 51
- Speaker Setup 51
- Setting of Dolby Digital 52
- Adjusting the DVD Level 53
- Using the Pro Logic II Mode 54
- Linear PCM Setting 54
- Getting out the Preset Memory 55
- Remote Control 56
- When Using the Remote Control 57
- Battery Replacement 57
- Information 58
- List of Language Codes 60
- List of Country Codes 61
- In Case of Difficulty 63
- Indication for CD Player 64
- Indication for CD Changer 65
- Specifications 66
- Installation 68
- Connections 70
- System Example 72
- LIMITED WARRANTY 74
Related products and manuals for Car speakers Alpine DVA-9965
Car speakers Alpine CDA-9820XM User Manual
(30 pages)
(30 pages)
Car speakers Alpine INA-W900 ES User Manual
(100 pages)
(100 pages)
Car speakers Alpine IDA-X303 User Manual
(48 pages)
(48 pages)
Car speakers Alpine PXA-H800 User Manual
(21 pages)
(21 pages)
Car speakers Alpine DHA-S690 User Manual
(84 pages)
(84 pages)
Car speakers Alpine DHA-S690 User Manual
(0 pages)
(0 pages)
Car speakers Alpine PDX-F4 User Manual
(10 pages)
(10 pages)
Car speakers Alpine iDA-X305S User Manual
(44 pages)
(44 pages)
Car speakers Alpine iDA-X100M User Manual
(43 pages)
(43 pages)
Car speakers Alpine KCA-420i User Manual
(14 pages)
(14 pages)
Car speakers Alpine PXA-H800 User Manual
(116 pages)
(116 pages)
Car speakers Alpine CDA-9886M User Manual
(50 pages)
(50 pages)
Car speakers Alpine iDA-X100M User Manual
(44 pages)
(44 pages)
Car speakers Alpine CDE-100 User Manual
(12 pages)
(12 pages)
Car speakers Alpine 7909 User Manual
(16 pages)
(16 pages)
© 2020, manymanuals.com. All rights reserved. | 1.730 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals