Alpine CDE-133EBT Owner's Manual download pdf (Page 21)

19-EN

Turn the Rotary encoder to select “CONNECT” to connect

the selected device.

The connected device is marked with “ ”. Select “DISCONNECT”

to disconnect this device. Select “CLEAR” when you want to clear

the device from the device list.

Notes

• If the connection is successfully changed, “CONNECTED” is displayed

for 2 seconds and the  indicator lights up, then the display returns to

the SETUP screen.

• If a mobile phone is connected to this unit successfully, the

indicator lights up to show the battery quantity of the connected mobile

phone. e indicator lights up when the battery quantity is in

middle level, and it blinks in low level.

• Indicator (Signal Strength):

e indicator will display the current signal strength of mobile phone.

e indicator blinks when the signal of the connected mobile phone is

weak.

• Depending on the connected mobile phone, the (battery

quantity), (signal strength) and (message) indicators may not be

displayed.

• If all the 3 positions have been registered, you cannot register the 4th

device. To register another device, you need to delete one of the devices

from position 1 to 3 rst.

You can set whether this unit can be recognised or not from a

BLUETOOTH compatible device. Normally set this to VISI M ON.

 Setting item: VISIBLE M

Setting contents:

VISI M OFF / VISI M ON (Initial setting)

VISI M OFF:

Disable recognition of this unit from the BLUETOOTH compatible

device.

VISI M ON:

Enable recognition of this unit from the BLUETOOTH compatible

device.

e BLUETOOTH device is used when a connectable BLUETOOTH

compatible device is searched and connected to this unit, or when a new

BLUETOOTH compatible device is registered.

 Setting item: SEARCH DEV

When SEARCH DEV is selected, and “SEARCHING” is

displayed, the search gets started.

Note

• e “SEARCHING” operation can be stopped by pressing .

Turn the Rotary encoder to select the name of the device

to be connected from the Device Search list and then

press ENTER.

If this unit is successfully connected to a BLUETOOTH

compatible device, “CONNECTED” is displayed, and then

the unit returns to normal mode.

Depending on the mobile phone, it may be necessary to input a

passcode. In this case, “CODE 0000” is displayed. Input the

passcode “0000” in the BLUETOOTH compatible device to make

the pairing. After the pairing is completed, the unit will

automatically connect to the BLUETOOTH compatible device. If

you input the wrong passcode or the communication fails,

“FAILED” is displayed.

You can exibly customize the sound of call to t your own preferences.

 Setting item: CALL SOUND

 Further setting items: VOL LV ADJ / AUTO SET

Adjusting the volume (VOL LV ADJ)

You can emphasise or weaken the volume level of the Phone call, the

ring tone and the microphone input to t your own preferences.

Setting contents:

PHONE TALK:

-5 dB~ +5 dB

RING TONE:

-5 dB~ +5 dB

MIC GAIN:

-5 dB~ +5 dB

Note

• ese setting items are the same as PHONE TALK, RING TONE and

MIC GAIN settings in AUDIO step mode, refer to “Setting the Source

Volume Level” on page 13.

Sound Auto setting (AUTO SET)

is unit provides 5 methods to improve the sound quality of calling.

You can choose the type according to your own preference.

Setting contents:

TYPE1 (Initial setting) / TYPE2 / TYPE3 / TYPE4 / TYPE5

TYPE1:

Standard Mode (recommended)

TYPE2:

Enhance the noise reduction

TYPE3:

Enhance the echo-cancel

TYPE4:

Enhance both noise reduction and echo-cancel

TYPE5:

Weaken both noise reduction and echo-cancel

Notes

• e functions below are designed to improve the sound quality of the

caller to driver.

Noise reduction: is function can reduce the road noise, but excessive

enhancement may aect the sound quality of calling.

Echo-cancel: is function can reduce the echo noise, but excessive

enhancement may aect the sound quality of calling.

• Improvement eect diers depending on the actual calling

environment, so please choose a suitable type accordingly.

You can choose whether to use these functions according to the

following setting.

 Setting item: SENDER ID

 Further setting items: MSG ALERT / CALLER ID

Setting contents:

OFF / ON (Initial setting)

Setting the Visible Mode

Pairing a BLUETOOTH Device from the

unit

Setting the BLUETOOTH sound quality

Setting the caller information display/

text message indicator ON/OFF

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 39 40

Comments to this Manuals

No comments

Alpine CDE-133EBT Owner's Manual Page 21

Comments to this Manuals

Related products and manuals for Car media receivers Alpine CDE-133EBT