Alpine KCE-400BT Owner's Manual download pdf (Page 4)

3-EN

ALPINE KCE-400BT 68-14470Z05-A (EN)

How to connect to a Bluetooth

compatible device (Pairing)

For details on the control from a Bluetooth compatible

device, refer to the Owner’s Manual of the Bluetooth

compatible device.

Set a Bluetooth connection from a Bluetooth

compatible device.

The PIN code (“0000”) is displayed on the

connected unit.

• The PIN code is fixed as “0000”.

Input the PIN code (“0000”) in a Bluetooth

compatible device.

If the connected unit is successfully

connected to a Bluetooth compatible device,

a paired device name is displayed on the unit,

and then the unit returns to normal mode.

• The registration number 5 is the guest mode. Content that

is registered as the guest mode is deleted when you set

ignition from ACC to OFF. If all the 5 positions (including

guest mode) have been registered, you cannot register the

6th device. To register another device, you need to delete

one of the device from position1 to 5 first.

• If a Bluetooth compatible device is successfully connected,

the next time when the ignition key of the car is turned to

on, the unit will automatically connect to the previously

connected device. However, the connection may fail. If the

auto connection fails, try the connection manually.

• Set “Setting the Search Mode” (page 4) to ON to enable

the KCE-400BT to recognize a mobile phone. For mobile

phone passkey (passcode) input operation, refer to the

mobile’s Owner’s Manual.

Setup Before Using

About Bluetooth

Bluetooth is a wireless technology allowing communication

between a mobile device or personal computer over short

distances. This enables a hands-free call or data transmission

between Bluetooth compatible devices. Bluetooth

transmission is available in the unlicensed 2.4 GHz spectrum

if the distance between devices is within 10 meters. For

details, refer to the Bluetooth Homepage

(http://www.bluetooth.com/).

• Depending on the Bluetooth version, a Bluetooth

compatible device may not be able to communicate with

this adapter.

•Proper function of this adapter with all Bluetooth

compatible devices is not guaranteed. For handling of the

BT compatible device, consult your ALPINE dealer or

ALPINE website.

• Depending on the surroundings, Bluetooth wireless

connection may be unstable.

• When you place a call, or perform setup operations, be

sure to stop your car in a safe place.

•For details on the control (selection, enter, cancel) from the

connected unit, refer to the Owner’s Manual of the

respective unit.

• Depending on the connected Bluetooth compatible

device(s), the function may differ. Also refer to the Owner’s

Manual of the connected device(s).

Before Using Hands-Free Function

Before using the hands-free phone/audio function, the

following settings need to be made.

Be sure to set “INT MUTE” (in the setup

function of the connected CD Head Unit or

Digital Media Receiver) to OFF.

•To enable sound pass-through of the Bluetooth compatible

device, make sure that INT MUTE is turned OFF (Initial

setting on the unit is OFF).

Set “BLUETOOTH IN” or “BT IN” to

ADAPTER*. (Refer to the Owner’s Manual of

the connected units.)

Turn the ignition key off (ACC OFF) and on

again (ACC ON).

• Before using a hands-free phone, it must be paired with the

adapter. Refer to “Bluetooth SETUP” (pages 4-5).

* If “BLUETOOTH IN” or “BT IN” setting is turned OFF at

any time, adapter communication is canceled. To resume

communication: repeat Steps 1 through 3 above.

1 2 3 4 5 6 7 8 9 ... 12 13

Comments to this Manuals

No comments

Alpine KCE-400BT Owner's Manual Page 4

Comments to this Manuals